Switch - power window sub rear

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim. >
Remove the panel - power window sub switch rear.
CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
2. Remove the screws and disconnect the connector.
  
  Fig 1: Locating Rear Door Trim Panel Mounting Screw
  Courtesy of SUBARU OF AMERICA, INC.
3. Release the claws, and then remove the panel - power window sub switch rear.
  
  Fig 2: Removing Power Window Sub Switch Rear Panel
  Courtesy of SUBARU OF AMERICA, INC.
Release the claws, and then remove the switch - power window sub rear.

Fig 3: Identifying Power Window Sub Rear Switch Claws
Courtesy of SUBARU OF AMERICA, INC.