Check Relay

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check the resistance between relay terminals.

Terminal No.	Inspection conditions	Specification	Circuit
1 - 2	Always	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 2	Apply battery voltage between 4 - 3 terminals.	Less than 1 Ω	Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification	Circuit
1 - 2	Always	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 4	Always	Less than 1 Ω
1 - 2	Apply battery voltage between 3 - 5 terminals.	Less than 1 Ω

Replace the relay if the inspection result is not within the standard value.