LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Immobilizer System
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Immobilizer System

  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
    NOTE:

    If malfunctions occur, refer to "IMMOBILIZER (DIAGNOSIS)". < Refer to PROCEDURE , Basic Diagnostic Procedure. >