September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Power Window Control Switch: Inspection: Sub-Switch
- Remove the switch - power window sub.
- Check the resistance between terminals of the switch - power window sub.
Courtesy of SUBARU OF AMERICA, INC.
| |
Terminal No. |
Inspection conditions |
Standard |
| Passenger seat, rear |
4 - 5
6 - 7 |
UP |
Less than 1 Ω |
7 - 4
8 - 4 |
OFF |
1 MΩ or more |
5 - 8
6 - 7 |
Less than 1 Ω |
4 - 6
5 - 8 |
DOWN |
Less than 1 Ω |
- If the inspection result is not within the standard, replace the switch - power window sub.