October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Removal

Disconnect the ground cable from battery.
Remove the air intake duct (rear). (RH side only) < Ref. to REMOVAL , Air Intake Duct. >
Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
- RH side
  
  Fig 1: Locating Camshaft Position Sensor Bolt (RH)
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Locating Camshaft Position Sensor Bolt (LH)
  Courtesy of SUBARU OF AMERICA, INC.