External Connection Terminal: Removal

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the heater control assembly. <Ref. to REMOVAL , Control Panel.>
Remove the console box assembly. <Ref. to REMOVAL , Console Box.>
Release the claws, and then remove the panel center LWR.

Fig 1: Identifying Panel Center LWR And Claws
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws and remove the pocket assembly - CTR.

Fig 2: Locating CTR Pocket Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.
While pressing the claw, press it in from the rear to remove the unit assembly - AUX.

Fig 3: Removing AUX Unit Assembly
Courtesy of SUBARU OF AMERICA, INC.