LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Engine Wiring Harness >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Wiring Harness: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the intake manifold assembly. <Ref. to REMOVAL , Intake Manifold Assembly.>
  3. Disconnect each connector to remove the engine wiring harness.
    • Structural diagram 1
      Fig 1: Engine Wiring Harness Structural Diagram 1
      G10262148Courtesy of SUBARU OF AMERICA, INC.
    • Structural diagram 2
      Fig 2: Engine Wiring Harness Structural Diagram 2
      G10262149Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals