LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Sensor: Removal

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  5. Remove the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals