LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Entertainment System) >> Front Accessory Power Supply Socket >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Accessory Power Supply Socket: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the socket assembly.
    NOTE: Align the groove of the pocket assembly - CTR with the claw of the socket assembly.
  2. Install the pocket assembly - CTR.
  3. Install the panel center LWR.
  4. Install the cover assembly - front and the console box assembly.

    Tightening torque: 

    6.5 N.m (0.6 kgf-m, 4.8 ft-lb) 

  5. Install the heater control assembly.
  6. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
scientia non olet · About LEMON Manuals