LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Fuel Injection System (H4DO)) >> Manifold Absolute Pressure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the manifold absolute pressure sensor to the intake manifold assembly, and connect the connector to the manifold absolute pressure sensor.
    NOTE: Use new O-rings.

    Tightening torque: 

    3.4 N.m (0.3 kgf-m, 2.5 ft-lb) 

  2. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
scientia non olet · About LEMON Manuals