LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Fuel Injection System (H6DO)) >> Oil Flow Control Solenoid Valve >> Installation >> Intake Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Side

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  3. Install the collector cover.
scientia non olet · About LEMON Manuals