Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System Check».
On «Select System» display, select «Power Steering».
On «Select Function» display, select «DTC».
On «DTC» display, select «Clear Memory».
NOTE:
- Before performing memory clear, check the current data, and if there are any data of DTC, trouble status information, overheating protection intervention history, IGN count from overheating protection and assist limit history, save them.
- For detailed operation procedures, refer to "Application help".