Inspection Mode 2
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B2A04 | MIC CIRCUIT | < Ref. to DTC B2A04 MIC CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). > |
| B2A05 | LEFT SPEAKER/AUDIO CIRCUIT | < Ref. to DTC B2A05 LEFT SPEAKER/AUDIO CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). > |
| B2A06 | RIGHT SPEAKER/AUDIO CIRCUIT | < Ref. to DTC B2A06 RIGHT SPEAKER/AUDIO CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). > |
| B2A0A | RED LED CIRCUIT | < Ref. to DTC B2A0A RED LED CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). > |
| B2A0B | GREEN LED CIRCUIT | < Ref. to DTC B2A0B GREEN LED CIRCUIT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). > |
Inspection steps:
- Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
- Read the DTC and check that the DTC is not displayed. < Ref. to
DIAGNOSTIC CODE(S) DISPLAY . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Turn the ignition switch to OFF.
- Close all doors. (The vehicle enters CAN sleep state.)
- Wait for approx. 1 minute. After the indicator goes off, wait for another 1 minute. (DCM standby mode)
- Turn the ignition switch to ON, and wait for 5 seconds or more.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.