Immobilizer Control Module
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For C0 and C5 models
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Immobilizer» and then select «Enter».
- On «Immobilizer» display, select «DTC».
- On «DTC» display, select «Clear Memory».