AWD Warning Light Display: Inspection

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

At normal condition
Always light OFF
When malfunction is detected
AWD light blinks at 2 Hz when any of the following malfunctions are detected with the ignition switch ON.
1. When tire with different diameter is installed.
2. When air pressure of any of four tires is excessively low.

Courtesy of SUBARU OF AMERICA, INC.

If the illumination patterns are not as above, check the AWD light circuit.