Oil Flow Control Solenoid Valve: Assembly

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil flow control solenoid valve.
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
Apply liquid gasket to the two bolts securing oil return cover.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent
Attach the oil return cover and gasket.
NOTE: Use a new gasket.

Tightening torque:

9 N.m (0.9 kgf-m, 6.6 ft-lb)

Fig 1: Identifying Oil Flow Control Solenoid Valve, Oil Return Cover, Gasket And Front Camshaft Cap
Courtesy of SUBARU OF AMERICA, INC.