Auto Headlight Beam Leveler System: Procedure: REINITIALIZATION
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Bounce the vehicle several times to normalize the suspension.
- Make certain that someone is seated in the driver's seat.
- Turn the ignition switch to ON, and, within 1.5 - 10 seconds, turn the lighting switch OFF → ON five or more successive times.
- Check that the headlight beam drops once, then returns to normal.
- After confirming 4), turn the ignition switch to OFF within 30 seconds.
- Turn the ignition switch to ON again, and within 1.5 - 10 seconds, turn the lighting switch OFF → ON five or more successive times.
- Make sure that the indicator in the meter flashes three times and then turns OFF, indicating that reinitialization has been successfully completed. (At this time, the headlight beam drops once, and then returns to the original position.)
- Perform beam adjustment for the headlight. <Ref. to ADJUSTMENT , Headlight Assembly.>