LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Lighting System) >> Back-up Light Bulb >> Removal >> Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outback Model

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Release the claws and remove the bulb inspection cover of rear gate trim.
    Fig 1: Identifying Claws And Bulb Inspection Cover
    G10277245Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bulb socket and back-up light bulb.
    CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
    Fig 2: Rotating Bulb Socket And Back-Up Light Bulb
    G10277246Courtesy of SUBARU OF AMERICA, INC.