LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Entertainment System) >> Audio System >> Inspection >> Check Audio Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Audio Operation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Symptoms Inspection steps
No power coming in. (No display and no sound from speakers.)
  1. Check the fuse and power supply for audio.
  2. Check the audio ground.
  3. Remove the audio and repair them.
A specific speaker does not operate.
  1. Check the speaker.
  2. Check the output circuit between audio and speaker.
  3. Check the power amplifier. (Model with power amplifier)
Audio generates noise with engine running.
  1. Check the audio ground.
  2. Check the generator.
  3. Check the ignition coil.
  4. Remove the audio and repair them.
Volume is low in AM and FM modes or interference noise occurs.
  1. Check the antenna.
  2. Check the antenna amplifier.
  3. Check the noise regulator.
  4. Check the rear window defogger.
  5. Check the audio ground.
  6. Remove the audio and repair them.
Rear window defogger generates noise when it operate.
  1. Check the rear window defogger.
Error message is displayed. Refer to "Diagnostics with Phenomenon" in "INFOTAINMENT SYSTEM (DIAGNOSTICS)". <Ref. to BASIC DIAGNOSTIC PROCEDURE .>