Section 7 (Starting System & Charging System (WRX-STI)): Generator: Installation

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

CAUTION: Check and adjust the front side belt tension. < Refer to FRONT SIDE BELT , INSPECTION, V-belt. > < Refer to FRONT SIDE BELT , INSPECTION, V-belt. >

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 1: Locating Generator Mounting Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)

Fig 2: Locating V-Belt Covers

Courtesy of SUBARU OF AMERICA, INC.