Air Intake Boot: Installation
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air intake boot, and connect the PCV hose.
- Tighten the clamp (C) securing the throttle body to the air intake boot.
Tightening torque:
3 N.m (0.3 kgf-m, 2.2 ft-lb)
- Tighten the clamp (B) securing the air cleaner case (rear) to the air intake boot.
Tightening torque:
3 N.m (0.3 kgf-m, 2.2 ft-lb)
- Install the clip (A) to the air intake boot.