Oil Pressure Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Fig 1: Identifying Liquid Gasket Applying Area On Oil Pressure Switch Threads
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch to cylinder block.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal to the oil pressure switch.

Fig 3: Identifying Oil Pressure Switch Terminal
Courtesy of SUBARU OF AMERICA, INC.
Install the generator to the bracket. <Ref. to INSTALLATION , Generator.>
Connect the battery ground terminal.