LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Continuously Variable Transaxle (CVT)) >> Intermediate Case >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intermediate Case: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from vehicle body. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  3. Remove the parking pawl. <Ref. to REMOVAL , Parking Pawl.>
  4. Remove the rear drive shaft. <Ref. to REMOVAL , Rear Drive Shaft.>
  5. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  6. Remove the center differential carrier. <Ref. to REMOVAL , Center Differential Carrier.>
  7. Remove the transfer reduction driven gear assembly. <Ref. to REMOVAL , Transfer Reduction Driven Gear.>
  8. Remove the intermediate case.
    NOTE:
    • The total number of intermediate case mounting bolts is 14.
    • Inside the transmission is a single bolt (arrowed).
    Fig 1: Locating Transmission Single Bolt
    G10268246Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the CVTF filter.
    Fig 2: Identifying CVTF Filter
    G09482109Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the O-ring from the transmission case.
Fig 3: Locating Transmission Case O-Rings
G06654544Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals