LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Continuously Variable Transaxle (CVT)) >> Secondary Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.
  1. Remove the transmission from the vehicle. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the transmission cover on the transmission upper side.
    Fig 1: Identifying Transmission Upper Side Cover
    G10268148Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the secondary speed sensor harness connector.
  4. Remove the secondary speed sensor.
Fig 2: Identifying Secondary Speed Sensor Harness Connector
G09482003Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals