July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transfer Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the snap ring from transfer reduction driven gear.
Using the ST, remove the ball bearing (large) from transfer reduction driven gear.
ST1 899864100 REMOVER

ST2 398497701 SEAT

ST3 498077600 REMOVER

Fig 1: Removing Ball Bearing From Transfer Reduction Driven Gear Using Remover (ST 899864100)
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the ball bearing (small) from transfer reduction driven gear.
ST1 899864100 REMOVER

ST2 398497701 SEAT

ST3 18720AA000 REMOVER

Fig 2: Removing Ball Bearing From Transfer Reduction Driven Gear Using Remover (ST 899864100)
Courtesy of SUBARU OF AMERICA, INC.