LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Battery Current Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Current Sensor: Installation

  1. Installation of the battery current sensor assembly
    1. Install the battery current sensor assembly in place.
    2. Tighten the nut.

      Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}

    3. Connect the engine wire to the battery current sensor assembly with the nut.

      Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}

    4. Connect the connector.
scientia non olet · About LEMON Manuals