Power Window Control Switch: Inspection: Sub-Switch

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the switch - power window sub.

Check the resistance between terminals of the switch - power window sub.

Fig 1: Identifying Power Window Sub Switch Terminals

Courtesy of SUBARU OF AMERICA, INC.

	Terminal No.	Inspection conditions	Standard
Passenger seat, rear	4 - 5 6 - 7	UP	Less than 1 Ω
	7 - 4 8 - 4	OFF	1 MΩ or more
	5 - 8 6 - 7	OFF	Less than 1 Ω
	4 - 6 5 - 8	DOWN	Less than 1 Ω

If the inspection result is not within the standard, replace the switch - power window sub.