Select Lever: Assembly
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all the parts before assembly.
- Apply Multemp D or equivalent to the sliding portion of each part.
- Assemble in the reverse order of disassembly.NOTE: Insert the solenoid unit terminals to the harness connector.
- After installation, check the following points.
- The select indicator matches the select lever position when the select lever is changed from "P" range to "D" range.
- The select lever position and the position mark match each other.
- Operating force to move the select lever from "P" to "D" range