Light Control Sensor: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Remove the sensor - automatic light.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
1. Release the connector and claws, and remove the panel COMPL - instrument UPR.
  
  Fig 1: Identifying Light Control Sensor, Connector, Claws And Interior Trims
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and remove the sensor - automatic light from the panel COMPL - instrument UPR.
  
  Fig 2: Removing Sensor - Automatic Light From Panel COMPL (Instrument UPR)
  Courtesy of SUBARU OF AMERICA, INC.