Rear Combination Light Assembly: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: For 4 door model, replace the gasket - rear combination (b) of the light assembly - rear combination (a) with a new part. If the gasket - rear combination is reused, water may come inside of the vehicle.

Fig 1: Identifying Light Assembly And Rear Combination

Courtesy of SUBARU OF AMERICA, INC.

Install each part in the reverse order of removal.

Tightening torque:

Light assembly - rear combination: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)