Spot Map Light Switch

WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Fig 1: Measuring Resistance Between Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

Models without EyeSight

Terminal No.	Inspection conditions	Standard
6 - 5	Switch OFF	1 MΩ or more
6 - 5	Switch ON	Approx. 18 Ω

Models with EyeSight

Terminal No.	Inspection conditions	Standard
7 - 8	Switch OFF	1 MΩ or more
7 - 8	Switch ON	Approx. 18 Ω

Replace the light assembly - map if the inspection result is not within the standard value.