Unable To Perform Initialization

DIAGNOSTIC PROCEDURE

Step	Check	Yes	No
1 CHECK OPERATION. Operate all power seat switches to check operation of each motor.	Does each motor rotate for one second or more when operating each switch?	Go to step 2 .	Check the motor which does not operate.
2 CHECK SWITCH. Disconnect the harness connector of power seat switch assembly. Measure resistance between all terminals of power seat switch assembly. < Ref. to CHECK POWER SEAT SWITCH , INSPECTION, Power Seat System. >	Does the inspection result show normal status with no problem?	Replace the power seat control module.	Replace the power seat switch assembly.