LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Relay and Fuse >> Inspection >> Check Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Relay

  1. Measure the resistance between relay terminals.
  2. Replace the relay if the inspection result is not within the standard value.
Terminal No. Inspection conditions Standard Circuit
1 - 2 Always 1 MΩ or more
G08585558Courtesy of SUBARU OF AMERICA, INC.
1 - 4 Always Less than 1 Ω
1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω
scientia non olet · About LEMON Manuals