Oil Level Switch: Removal
- Disconnect the ground terminal from battery sensor. < Ref. to
BATTERY
, NOTE, Repair Contents. >
- Remove the under cover. < Ref. to
REMOVAL
, Front Under Cover. >
- Drain the engine oil. < Ref. to
REPLACEMENT , Engine Oil. >
- Disconnect the oil level switch connector from the engine harness, and remove the clip (A) securing the harness.
Courtesy of SUBARU OF AMERICA, INC.
- Remove clip (A) from the oil pan upper, and remove the oil level switch.
Courtesy of SUBARU OF AMERICA, INC.