Power Steering System (Diagnostics)
- Basic Diagnostic Procedure
- Check List for Interview
- General Description
- Electrical Component Location
- Control Module I/O Signal
- Subaru Select Monitor
- Read Diagnostic Trouble Code (DTC)
- Inspection Mode
- Clear Memory Mode
- STEERING Warning Light
- List of Diagnostic Trouble Code (DTC)
- Diagnostic Procedure with Diagnostic Trouble Code (DTC)
- DTC C2511 Torque Sensor Main
- DTC C2512 Torque Sensor Sub
- DTC C2513 Torque Sensor Much Tolerance
- DTC C2514 Torque Sensor Power Supply
- DTC C2521 Motor Malfunction
- DTC C2522 Resolver Sensor
- DTC C2531 Control Module CPU
- DTC C2532 Control Module Peripheral Circuit
- DTC C2533 Control Module Board Temperature Sensor
- DTC C2541 Vehicle Dynamics Control Module Vehicle Speed Sensor
- DTC C2543 Error Passive
- DTC C2544 Auto Start Stop SYSTEM
- DTC C2545 EyeSight SYSTEM
- DTC C2546 EyeSight VALUE
- DTC C2547 EyeSight CHECK SUM
- DTC C2548 Vehicle Dynamics Control Module System
- DTC C2551 Power Supply Relay
- DTC U0073 Control Module Communication Bus Off
- DTC U0100 Lost Communication With ECM/Pcm "A"
- DTC U0122 Lost Communication With Vehicle Dynamics Control Module
- DTC U0126 Lost Communication With Steering Angle Sensor Module
- DTC U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module
- DTC U0401 Invalid Data Received From ECM/Pcm "A"
- DTC U0416 Invalid Data Received From Vehicle Dynamics Control Module
- DTC U1120 Lost Communication With AUTOSTART Stop Control Module
- DTC U1235 LOST COMMUNICATION WITH EyeSight
- DTC U1433 INVALID DATA RECEIVED FROM EyeSight
- DTC U1469 Invalid Data Received From AUTOSTART Stop Control Module