LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Horn System >> Relay and Fuse >> Inspection >> Check Relay
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    1 - 2 Always 1 MΩ or more
    G06653408
    1 - 2 Apply battery voltage between terminals 4 and 3. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals