Rearview Camera System: Removal

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
Remove the trim panel - trunk lid. < Ref. to REMOVAL , Trunk Room Trim. >
Remove the garnish - trunk. < Ref. to REMOVAL , Trunk Lid Garnish. >
Remove the rearview camera assembly.
CAUTION: Do not drop or apply any impact to the rearview camera because it is a precision equipment.
1. Disconnect the connector.
2. Release the claw and hook, and then remove the rearview camera assembly.
  
  Fig 1: Locating Rearview Camera Assembly Claw And Hook
  Courtesy of SUBARU OF AMERICA, INC.