Rear Regulator and Motor Assembly: Installation
- Install the regulator and motor assembly rear.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the glass assembly - rear door. < Ref. to INSTALLATION , Rear Door Glass. >
- Install the sealing cover - rear door.
- Install the trim panel - rear door. < Ref. to INSTALLATION , Door Trim. >
- Connect the battery ground terminal. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, connect the ground terminal to battery sensor.