LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Continuously Variable Transaxle (CVT)) >> Forward Clutch Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward Clutch Assembly: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Select a washer. < Ref. to ADJUSTMENT , Forward Clutch Assembly. >
  2. Install the selected washer.
    Fig 1: Identifying Washer
    G06654568Courtesy of SUBARU OF AMERICA, INC.
  3. Install the forward clutch assembly.
    Fig 2: Identifying Forward Clutch Assembly
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  4. Install the thrust needle bearing.
    NOTE: Install the thrust needle bearing in the correct direction.
    Fig 3: Identifying Thrust Needle Bearing
    G06654571Courtesy of SUBARU OF AMERICA, INC.
  5. Install the intermediate case. < Ref. to INSTALLATION , Intermediate Case. >
  6. Install the transfer reduction driven gear assembly. < Ref. to INSTALLATION , Transfer Reduction Driven Gear. >
  7. Install the center differential carrier. < Ref. to INSTALLATION , Center Differential Carrier. >
  8. Install the transfer clutch assembly. < Ref. to INSTALLATION , Transfer Clutch. >
  9. Install the rear drive shaft. < Ref. to INSTALLATION , Rear Drive Shaft. >
  10. Install the extension case. < Ref. to INSTALLATION , Extension Case. >
  11. Install the transmission to vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals