LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Continuously Variable Transaxle (CVT)) >> Intermediate Case >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intermediate Case: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the extension case. < Ref. to REMOVAL , Extension Case. >
  3. Remove the parking pawl. < Ref. to REMOVAL , Parking Pawl. >
  4. Remove the rear drive shaft. < Ref. to REMOVAL , Rear Drive Shaft. >
  5. Remove the transfer clutch assembly. < Ref. to REMOVAL , Transfer Clutch. >
  6. Remove the center differential carrier. < Ref. to REMOVAL , Center Differential Carrier. >
  7. Remove the transfer reduction driven gear assembly. < Ref. to REMOVAL , Transfer Reduction Driven Gear. >
  8. Remove the intermediate case.
    NOTE:
    • The total number of intermediate case mounting bolts is 14.
    • Inside the transmission is a single bolt (arrowed).
    Fig 1: Locating Transmission Single Bolt
    G10268246Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the CVTF filter.
    Fig 2: Identifying CVTF Filter
    G09482109Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the O-ring from the transmission case.
    Fig 3: Locating O-Ring Of Transmission Case
    G06654544Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals