Pitching Stopper

WARNING: This page is about a different variant/trim than selected.

Install the pitching stopper.
Tightening torque:

T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

Fig 1: Identifying Pitching Stopper Bolts With Torque Specification
Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. < Ref. to INSTALLATION , Intercooler. >
Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Note. >