LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX STI Series.HyperBlue >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT)) >> Secondary Pressure Sensor >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Start and warm up the engine.
  2. Shift the select lever to "P" or "N" range.
  3. Depress the brake pedal and hold it.
  4. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. < Ref. to OPERATION , Subaru Select Monitor. >

    Specification: 

    Approx. 0.8 V 

  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. < Ref. to OPERATION , Subaru Select Monitor. >

    Specification: 

    Approx. 0.5 V 

scientia non olet · About LEMON Manuals