Alignment/Handling Diagnosis: Notes
VEHICLE HEIGHT SERVICE DATA SPECIFICATIONS
| Front B - A | Rear C | Rear D | Rear E |
|---|---|---|---|
| 146 mm (5.75 in.) | 195 mm (7.68 in.) | 375 mm (14.76 in.) | 372 mm (14.65 in.) |
Measurement points:
- Ground clearance of front lower suspension arm set front bolt center
- Ground clearance of front wheel center
- Ground clearance of lower control arm set bolt center
- Front wheel arch height of front wheel center
- Rear wheel arch height of rear wheel center
CAMBER SERVICE DATA SPECIFICATIONS
| - | Camber Inclination | Right-left Difference |
|---|---|---|
| Front | 0 +/- 45' | 30' or less |
| Rear | -1°10' +/- 45' | 45' or less |
CASTER SERVICE DATA SPECIFICATIONS
| - | Caster Inclination (Reference) |
|---|---|
| Front | 5°55' (5.90°) |
WHEEL TURNING ANGLE SERVICE DATA SPECIFICATIONS
| - | Inside Wheel (Reference) | Outside Wheel (Reference) |
|---|---|---|
| Front | 36°54' | 31°12' |
TOE-IN SERVICE DATA SPECIFICATIONS
| - | Specified Condition |
|---|---|
| Front | Toe angle (sum of wheels): 0°00' +/- 0°15' (0.00° +/- 0.25°) |
| 0 +/- 3.0 mm (0 +/- 0.12 in.) | |
| Rear | Toe angle (sum of wheels): 0°10' +/- 0°15' (0.16° +/- 0.25°) |
| 2.0 +/- 3.0 mm(0.08 +/- 0.12 in.) |
SERVICE DATA (Distance between the centers of the 2 installation bolts of the rear No. 2 suspension arm assembly LH and RH)
| - | Standard distance |
|---|---|
| Rear | 457.5 +/- 3 mm (18.01 +/- 0.12 in.) |
SERVICE DATA (Distance between the centers of the 2 installation bolts of the rear No. 2 suspension arm assembly)
| - | Standard distance |
|---|---|
| Rear | 450.9 +/- 2 mm (17.75 +/- 0.08 in.) |