Rear ABS Wheel Speed Sensor: Installation
CAUTION:
Be careful not to damage the sensor.
- Install each part in the reverse order of removal.
- Route the rear ABS wheel speed sensor cable to the upper arm assembly.
NOTE:
Check the identification (mark) on the harness to make sure there is no warpage. Ref. to
SPECIFICATION , General Description.
Tightening torque:
Rear ABS wheel speed sensor: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Rear wheel (except for C4 model): 120 N.m (12.2 kgf-m, 88.5 ft-lb)
Rear wheel (C4 model): 100 N.m (10.2 kgf-m, 73.8 ft-lb)