Rear ABS Wheel Speed Sensor: Installation
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
- Install each part in the reverse order of removal.NOTE: Check the identification (mark) on the harness to make sure there is no warpage. Ref. to VEHICLE DYNAMICS CONTROL (VDC)>General Description>SPECIFICATION .
Tightening torque:
Rear ABS wheel speed sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Rear wheel: 120 N.m (12.24 kgf-m, 88.5 ft-lb)
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .