VDC OFF Switch: Inspection
- Disconnect the VDC OFF switch connector.
- Check the resistance between the VDC OFF switch terminals.
Preparation tool:
Circuit tester
- Model without power rear gate Fig 1: Checking Resistance Between VDC OFF Switch Terminals (Model Without Power Rear Gate) Shown in Connector End View
Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Standard 2 - 3 Switch OFF 1 M or more Switch ON Less than 1 - Model with power rear gate
Fig 2: Checking Resistance Between VDC OFF Switch Terminals (Model With Power Rear Gate) Shown In Connector End ViewCourtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Standard 1 - 2 Switch OFF 1 M or more Switch ON Less than 1
- Model without power rear gate
- Replace the VDC OFF switch if the inspection result is not within the standard value.