Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the collector cover.
1. Carefully pull up the rear of collector cover at two positions (A).
2. Carefully pull up the front of collector cover at two positions (B) while moving it forward.
Fig 1: Removing Collector Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Disconnect the connector (A) from the oil temperature sensor, and remove the oil temperature sensor from the cylinder block.

Fig 2: Locating Oil Temperature Sensor Nut With Connector

Courtesy of SUBARU OF AMERICA, INC.