Converter Case: Assembly

1. Install the oil drain plug.

   Tightening torque: 

   70 N.m (7.1 kgf-m, 51.6 ft-lb) 

2. Install the overflow drain plug.
   NOTE: Overflow plug of differential gear oil is temporarily attached.
3. Install all plugs.
   NOTE: Use new O-rings.

   Tightening torque: 

   T1: 22 N.m (2.2 kgf-m, 16.2 ft-lb) 

   T2: 22.5 N.m (2.3 kgf-m, 16.6 ft-lb) 

   Fig 1: Plugs With Torque Specifications

   Courtesy of SUBARU OF AMERICA, INC.
4. Install the transmission hanger and transmission radio ground cord.

Tightening torque: 

41 N.m (4.2 kgf-m, 30.2 ft-lb)