LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal >> Outback Model
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Outback Model

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the trim panel - rear apron RH. <Ref. to OUTBACK MODEL , REMOVAL, Rear Quarter Trim.>
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
    Fig 1: Disconnecting Keyless Entry Control Module Connector - Outback Model
    G10272970Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals