LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> Electrical >> Charging Systems >> Starting System & Charging System (H6DO) >> Battery Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    Fig 1: Disconnecting Connector And Battery Holder Clip
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals